性能特点 Performance Features
◆ 采用高强度机身构造,变形量小,精度高。
◆ 采用OMPI气动干式离合刹车器。
◆ 滑块采用两角六面导路,滑块导轨采用“高频淬火”十 “导轨研磨工艺”,磨损小,精度高,精度保持时间长、提高模具使用寿命。
◆ 曲轴采用高强度合金材质42CrMo,强度比45钢提高了1.3倍,使用寿命更长。
◆ 铜套采用锡磷青铜ZQSn10-1,强度比普通BC6黄铜提高了1.5倍。
◆ 采用高灵敏液压过载保护装置,可有效保护冲床和模具使用寿命。
◆ 标配SMC调压阀、油雾器、空气过滤器。
◆ 可选配模垫(气垫)。
◆ Adopting high-strength body structure, with small deformation and high accuracy.
◆ Adopting OMPI pneumatic dry clutch brake.
◆ The slider adopts a hexagonal guide path with two corners, and the slider guide adopts a "high-frequency quenching" and "rail grinding process", which has low wear, high accuracy, long accuracy retention time, and improved mold service life.
◆ The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
◆ The copper sleeve adopts tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than ordinary BC6 brass.
◆ Adopting a highly sensitive hydraulic overload protection device can effectively protect the service life of the punching machine and mold.
◆ Standard SMC pressure regulating valve, oil mist filter, and air filter.
◆ Optional mold pad (air cushion).
上一条:STC开式双点曲柄精密冲床
下一条:STV闭式单点曲柄精密冲床